Made from stainless steel wires welded at each intersection, stainless steel welded wire mesh forms a sturdy grid. This versatile mesh finds applications in construction, agriculture and security for fencing, enclosures, and reinforcement. The advantages of stainless steel welded wire mesh include its long lifespan, low maintenance requirements, and ability to withstand harsh environmental conditions, guaranteeing reliable performance over time.

Stainless Steel Welded Wire Mesh Material

Stainless steel welded wire mesh is typically made from high-quality alloys, primarily grades 304 and 316.

Grade 304 (18-8 Stainless Steel)

• Composition: 18% chromium, 8% nickel
• Corrosion Resistance: Excellent in many environments, including outdoors and mildly acidic conditions.
• Applications: General-purpose applications like fencing, enclosures, industrial machinery protection, and construction projects.

Grade 304L: A low-carbon version of 304, offering improved weldability.

Grade 316 (Marine Grade)

• Composition: 16% chromium, 10% nickel, 2% molybdenum
• Corrosion Resistance: Superior, especially in chloride and saline environments (marine and industrial sites with harsh chemicals).
• Applications: Marine industries, chemical processing, and high-salinity areas.

Grade 316L: A low-carbon version of 316, providing similar benefits to 304L in terms of weldability and resistance to sensitization.

Grade 430 (Ferritic Stainless Steel)

• Composition: Primarily iron with chromium content for corrosion resistance.
• Properties: Good corrosion resistance and formability.
• Applications: Less demanding applications where cost is a factor.

Stainless Steel Welded Wire Mesh Count (Mesh Size)

Stainless steel welded wire mesh count refers to the number of openings per linear inch.

• Mesh Count (2-10 Mesh)
  Mesh Size: 2.00 mm – 8.47 mm opening size.
  Applications: For coarse filtration, such as debris and gravel screening, where large particles need to be separated.
• Mesh Count (10-40 Mesh)
  Mesh Size: 0.425 mm – 2.00 mm opening size.
  Applications: For sifting and separating larger particles like sand, grains, and other bulk materials.

Wire Diameter

Wire diameter determines in certain extent the strength and flexibility of the mesh:

• Small diameters (0.5 mm or 0.020 inch, BWG 25): Flexible, easy bending or shaping.
• Medium diameters (1.0 mm or 0.039 inch, BWG 19): Balanced strength and flexibility for general purposes.
• Large diameters (2.0 mm or 0.079 inch, BWG 14): Increased strength for heavy-duty filtration or security purposes.

Open Area Percentage

Open area percentage determines the mesh’s permeability:

• 30-50% open area: Suitable for applications requiring good airflow, such as ventilation screens.
• 60-80% open area: Suitable for applications requiring high flow rates, mainly used for animal enclosures.

Standard Roll Lengths

Standard roll lengths for stainless steel welded wire mesh vary to meet different project needs:

• 10 meters (33 feet): Suitable for smaller projects or precise applications.
• 30 meters (99feet): Common length for most general applications.
• 50 meters (164 feet) and 100 meters (328 feet): Available for larger-scale projects requiring extensive material.

Standard Widths

Stainless steel welded wire mesh comes in various standard widths to suit project needs, with a typical tolerance of ±2% for accurate measurements.

• 1 Meter (39 inches): Suitable for small-scale applications or precise fitting.
• 1.2 Meters (47 inches): Commonly used for medium-sized projects.
• 1.5 Meters (59 inches): Ideal for larger-scale applications requiring broader coverage.
• 2 Meters (79 inches): Used for extensive projects requiring substantial coverage.
• Custom Widths: While these are standard sizes, we also offer custom widths to meet specific project requirements.

Available Forms

Stainless steel welded wire mesh comes in three common forms to suit your project needs:

Rolls

• Description: Most economical for large projects. Rolls offer continuous mesh lengths that can be cut to size and shaped as needed.
• Considerations: May require additional fabrication.

Sheets

• Description: Ideal for projects requiring precise dimensions and easier handling compared to rolls.
• Considerations: Size options are limited, and cutting larger sheets can generate waste.

Panels

• Description: Fast to install, featuring interlocking edges or frames for rigid structures.
• Considerations: Panels come in various sizes but are typically more expensive and less customizable than rolls or sheets.

Choosing the Right Form

• Project Needs: Do you need precise dimensions or custom shapes?
• Installation Ease: Is quick assembly a priority?
• Budget: What is the cost per unit area, and are there potential fabrication costs?
• Project Size: Large projects often favor rolls, while smaller projects might prefer pre-cut sheets or panels.

Finishing

Finishing options for welded stainless steel mesh:

• Plain (mill finish): Offers a basic, uncoated finish for general applications.
• Powder-coated: Offers a decorative finish and additional corrosion resistance, suitable for both indoor and outdoor use.

Custom and Stock

We offer a diverse inventory, a range of custom solutions for customers.

316 Stainless Steel 16 GA Welded Wire Mesh

• Mesh Size: 1/2″ x 1/2″ (12.7 mm x 12.7 mm)
• Length: 15 meters (50 feet)
• Wire Gauge: 16 GA (1.29 mm)
• Common Mesh Count Sizes
  2 x 2 (12.7 mm x 12.7 mm): Suitable for animal control and fencing.
  4 x 4 (6.4 mm x 6.4 mm): Suitable for machine guarding panels.
  6 x 6 (4.2 mm x 4.2 mm): Suitable for animal enclosures, cages and garden fencing.
  8 x 8 (3.2 mm x 3.2 mm): Suitable for chicken coops and runs.
• Weight Calculation For the 16 GA example:
• Wire weight per square meter: (0.00129 m * 8000 kg/m³) ≈ 10.32 kg/m²
• Total mesh area: (12.7 mm x 12.7 mm/mm²) * 15 m ≈ 2.43 m²
• Estimated weight of the roll: 10.32 kg/m² * 2.43 m² ≈ 25 kg

How to Order

• Choose required mesh count based on your application.
• Contact us with your complete specifications (material, mesh type, size, length, wire gauge, mesh count) to get quotes. We can provide accurate weight estimates based on your chosen options.

316 Welded Stainless Steel Mesh 1/2″ Square .022 Wire Diameter

• Mesh Size: 1/2″ x 1/2″ (12.7 mm x 12.7 mm)
• Wire Diameter: 18 GA (1.02 mm)
• Dimensions:
  36 feet x 25 feet (±)
• Common Wire Gauge Options
  10 GA (3.5 mm)
  12 GA (2.67 mm)
  14 GA (2.01 mm)
  16 GA (1.29 mm)
  18 GA (1.02 mm)
• Preferred Dimensions
  36 feet x 25 feet
• Note: Standard welded wire mesh often comes in rolls with specific widths (e.g., 1 meter, 4 feet) and pre-cut lengths may not always be available.

316 Stainless Steel Welded Wire Mesh for Australian

• Material: 316 Stainless Steel
• Mesh Type: Welded Wire Mesh
• Mesh Size: 1/2″ x 1/2″ (12.7 mm x 12.7 mm)
• Wire Diameter: 1.0 mm
• Gauge: 18 GA (1.02 mm)

Roll Dimensions

• Width: 1 meter (standard size)
• Length: 30 meters
• Total Area: 30 meters x 1 meter = 30 square meters (corrected calculation based on width)

Application

Purpose: Constructing a screen house for growing fruits and vegetables in Australia.

• Vermin Protection: The 1/2″ x 1/2″ mesh size effectively deters unwanted pests while allowing air circulation.
• Pollinator Access: The mesh openings are large enough for beneficial insects like bees to enter for pollination.
• Oceanfront Suitability: 316 stainless steel offers superior corrosion resistance, common in coastal areas of Australia.

316 Stainless Steel 25 GA Welded Wire Mesh for USA

Standard Wire Diameters

• We offer 316 stainless steel welded wire mesh with a standard wire diameter of 0.5 mm (approximately 25 GA) or less.

Mesh Size Options

Welded wire mesh comes in a mesh size range of 30-50 mesh.

• 30-50 openings per square inch
• 1.18 – 0.59 openings per millimeter
• A higher mesh count indicates a finer mesh with smaller openings.

Customization Options

We offer customization options to meet your specific needs.

• Material: 316 Stainless Steel (standard)
• Mesh Size: Within the range of 30-50 mesh (1.18-0.59 openings per mm)
• Wire Diameter: As thin as 0.28 mm (approximately 30 GA) or any size within the standard range (0.5 mm or less)

Contact Us

• Our team can help you select the most suitable mesh size and wire diameter based on your specific application requirements.  

304 Stainless Steel Welded Wire Mesh (Italy)

• Type: 304 Stainless Steel
• Mesh Opening Size: 20 mm x 20 mm (0.79″ x 0.79″)
• Wire Diameter: 2 mm (0.079″)
• Size of Each Wire Piece: 980 mm x 900 mm (38.58″ x 35.43″)
• Total Pieces: 2900
• Individual Mesh Pieces: These pieces likely won’t interlock to form a complete mesh structure. You may need a separate frame or additional fabrication to create the desired mesh size.
• Pre-cut Panels: If these are pre-cut panels with interlocking edges, please specify the method of interlocking (e.g., wires with bends for a welded connection at assembly). 

304 Stainless Steel Welded Mesh. Wire dia. 0.063″ 48″x100′ Rolls

• Material: 304 Stainless Steel
• Wire Diameter: 0.063″ (1.60 mm)
• Mesh Size: Mesh size refers to the openings between the wires. 2″ x 2″, 4 openings per inch
• Roll Dimensions
  Width: 48″ (1219.20 mm)
  Length: 100′ (30.48 meters)
• Additional Information:
  These rolls come with any additional features, such as surface finish options (e.g., polished, galvanized) or edge treatments.

Custom 304 Stainless Steel Welded Special Wire Mesh Sheet

• Material: 304 Stainless Steel
• Wire Diameter: 1/8″ (3.17 mm)
• Mesh Opening: 3″ x 1/2″ (76.2 mm x 12.7 mm)
• Welded wire mesh with rectangular openings.

Architectural Panels of 316L Stainless Steel Welded Wire Mesh

• Mesh Opening Size: ½” x 3″ (12.7 mm x 76.2 mm)
• Wire Diameter: 1/8″ (3.17 mm)
• Material: 316L Stainless Steel
• Can be used for architectural facade and decorative railings.

Stainless Steel Welded Wire Mesh Panels 4×4 opening 5′

• Material: Choose between Stainless Steel 304 or 316 (both options available)
• Mesh Opening Size: 4″ x 4″ (101.6 mm x 101.6 mm)
• Wire Diameter Options: 2 mm or 2.6 mm
• Panel Width: 5 feet (1524 mm)
• Panel Length: 100 feet (30480 mm)

Panel Options: Individual Mesh or Pre-cut Panels

• Individual Mesh Pieces: Large pieces of mesh (5′ x 100′) for cutting to size or incorporating into a custom frame for added rigidity. For projects requiring custom shapes or where a frame will be used for support.
• Pre-cut Panels: Welded mesh panels come ready-to-use with interlocking edges (typically bends in the wires) for easy assembly, creating a secure and rigid structure.

Additional Considerations:

• Stainless Steel Grade: 304 offers good corrosion resistance for many environments. 316 provides superior resistance for harsher conditions with high humidity or salt spray.
• Wire Diameter: A thicker wire diameter (2.6 mm) offers greater strength, while a thinner wire (2 mm) provides a lighter weight and more open area.

Contact Us

• For inquiries or to discuss your options between individual mesh or pre-cut panels, please contact us. We’re happy to assist you in selecting the most suitable stainless steel welded wire mesh solution for your needs.

Electro-Welded Stainless-Steel Mesh for India

• Grade: 316 Stainless Steel (marine grade)
• Type: Electro Welded Open Mesh
• Mesh Opening Size: 12×12 mm (square openings)
• Wire Diameter: 1.6-1.8 mm
• Quantity: Total Area: 12,000 square meters (SQM)

Electro-Welded Stainless Steel Mesh for Export to Ho Chi Minh City, Vietnam

• Stainless Steel Grade: Two grades of stainless steel: SS304 or SS316.
• Type: Electro-Welded Open Mesh
• Opening Size: 12 x 12 mm (Square)
• Wire Diameter: 1.6 – 1.8 mm
• Quantity:
  SS304 Mesh: 2,000 square meters (sqm)
  SS316 Mesh: 22,000 square meters (sqm)
• Destination: Ho Chi Minh City, Country: Vietnam
• HS Codes:
  1)HS Code 7314.19.00: Applies to electro-welded mesh of iron or steel, clad with stainless steel, with a mesh size of more than 100 cm². This mesh features a very thin layer of stainless steel cladding on a mild steel core.
  2)HS Code 7314.11.00: Covers electro-welded mesh of stainless steel, with a mesh size of more than 100 cm². The mesh is solid SS304 or SS316. 

Modular Stainless Steel Wire Mesh Shelving System

Welded mesh shelf offers following Benefits

• Durable: Constructed from high-quality stainless steel for long-lasting performance.
• Modular: Comprised of pre-fabricated sections for easy installation and customization.
• Long Sections: Offers efficient storage solutions for large items or bulk quantities

Specifications

• Total Length: Approximately 1,000 linear feet (exact length can be adjusted based on needs).
• Section Specifications:
  Length: 10 feet (customizable)
  Height: 3 feet
  Edging: Tolled edges (no sharp corners for safety)
  Section #
  1: 60’
  2: 80’
  3: 60’
  4: 80’

Mesh Material:

• Choose between 304 or 316 grade stainless steel for varying degrees of corrosion resistance.

Mesh Opening Specifications

• Opening Shape: Opt for either rectangular or square mesh openings to suit your specific storage requirements.
• Opening Size: Select a mesh opening size between 3mm and 7mm on a side. We recommend a 4-5mm size for a good balance of airflow and item support.

Customization and Quotation

• We offer customization options to tailor the system to your exact needs, including total length, section dimensions, and number of sections.
• To ensure an accurate quote and discuss your specific requirements, please contact us directly.

Electro-Welded Stainless Steel Square Mesh (JIS G4309) – Export to North Port, Malaysia

• Material: SUS 316/316L Stainless Steel (Marine Grade)
• Standard: JIS G4309 (Equivalent to ASTM AISI 316/L)
• Type: Electro-Welded Square Mesh
• Wire Diameter: 2.0 mm (Ø)
• Mesh Opening Size: 1.0″ x 1.0″ (#)
• Panel Width: 1.22 meters (W)
• Panel Length: 30.0 meters (L)
• Quantity: 1035 Rolls
• Destination: Port: North Port, Malaysia
• Lead Time: Within 14 – 30 working days upon confirmation of purchase order (PO)